This cylindrical roller bearing carries radial load in a single row and locates the shaft axially, with two ribs on the outer ring and one rib on the inner ring plus an internal rib washer forming the NUP design. Bore diameter is 60.0 mm, outside diameter 110.0 mm, width 28.0 mm, and net mass 1.1 kg. The E design provides increased load rating compared to standard internal geometry. Limiting speed is 8900 1/min, reference speed 4300 1/min, cage is a glass-fibre reinforced polyamide type TVP2, and radial internal clearance falls in group CN. The rib arrangement allows this bearing to act as the locating bearing in a shaft assembly, taking up axial loads in both directions while the polyamide cage keeps rolling element spacing stable at higher speeds. Standard CN clearance suits normal fits and operating temperatures without additional adjustment, and the open design requires external sealing and a separate lubrication supply, either grease or oil, matched to the reference and limiting speed values given.