This single-row cylindrical roller bearing NJ212-E-XL-TVP2 has a bore of 60.0 mm, an outside diameter of 110.0 mm, and a width of 22.0 mm, with a net mass of 0.842 kg. The outer ring carries two ribs and the inner ring one rib, corresponding to the NJ design, allowing axial displacement in one direction while the ribs provide axial location the other way. The bearing uses a TVP2 cage, E design for increased load rating, and CN (Group N) radial internal clearance. Limiting speed is rated at 8900 1/min, with a reference speed of 5300 1/min. Because the NJ configuration only locates the shaft axially in one direction, this cylindrical roller bearing functions as a semi-locating bearing, suitable where the shaft requires guidance on one side while permitting thermal expansion or free axial movement on the other. The polyamide TVP2 cage supports smooth roller guidance at the stated speed range, and the E design geometry increases the number of rollers for higher radial load capacity within the given dimensions. Standard CN clearance makes it suitable for general mounting conditions without special fit compensation.