This cylindrical roller bearing is a single row non-locating design with a bore of 60.0 mm, outside diameter of 110.0 mm, and width of 28.0 mm, weighing 1.06 kg. The outer ring carries two ribs while the inner ring is smooth (type NU), allowing free axial displacement of the inner ring relative to the outer ring. The cage is a polyamide TVP2 type, and the internal geometry follows the E design for increased load capacity. Radial internal clearance is CN (Group N), with running accuracy to P6. Limiting speed is rated at 8900 rpm, reference speed at 4300 rpm. The non-locating configuration makes this bearing suitable for shaft arrangements where axial compensation is required due to thermal expansion or shaft deflection, while the smooth inner ring allows the rollers to move axially without transmitting axial load. The P6 running accuracy supports applications requiring tighter radial and axial runout control than standard tolerance class. Standard CN clearance is suited for typical fit and temperature conditions without preload requirements. The TVP2 cage design guides the rollers reliably at the stated speed ratings, and grease or oil lubrication can be applied according to the operating speed and temperature range of the installation.