This cylindrical roller bearing carries a full complement roller set in a single row, with 60.0 mm bore, 85.0 mm outside diameter and 16.0 mm width, giving a net mass of 276.5 g. The outer ring has one rib and the inner ring has two ribs, forming a semi-locating design (type SL18, variant B) that guides the roller set axially on one side while allowing free axial movement on the other. Radial internal clearance is set to C3 (Group 3), and the limiting speed reaches 5400 1/min, with a reference speed of 2900 1/min. The full complement roller set increases radial load capacity per unit volume compared to caged designs, at the cost of higher friction, so it suits applications where load capacity within limited radial space matters more than high-speed running. The semi-locating configuration allows the bearing to accommodate axial displacement of the shaft on the non-ribbed side while still providing guidance on the ribbed side, and the C3 clearance compensates for thermal expansion under load, keeping the roller set properly seated during operation.