This cylindrical roller bearing has a single row of rollers guided by a machined cage (M1), with two ribs on the outer ring and a smooth inner ring, corresponding to design NU. Bore diameter is 60.0 mm, outside diameter 110.0 mm, and width 28.0 mm, with a net mass of 1.19 kg. The limiting speed is 11500 1/min, and the reference speed is 4300 1/min. Running accuracy is manufactured to P6, and the E design provides increased load carrying capacity through optimized internal geometry. As a non-locating bearing, this type allows axial displacement of the inner ring relative to the outer ring, compensating for thermal expansion or shaft length tolerances. The radial internal clearance is C3 (Group 3), which is wider than standard clearance and suitable where operating temperatures or fit conditions require additional internal play. The machined M1 cage supports stable roller guidance at higher speeds within the stated limiting and reference speed values.