This cylindrical roller bearing carries a single row of rollers guided by a polyamide cage (TVP2), with two ribs on the outer ring and one rib on the inner ring, corresponding to the NJ design. Bore diameter is 75.0 mm, outside diameter 130.0 mm, width 31.0 mm, and net mass 1.6 kg. The optimized internal design (E) provides increased load carrying capacity within the same envelope dimensions. Limiting speed is rated at 7500 1/min, with a reference speed of 3600 1/min. The bearing is supplied with C3 radial internal clearance, compensating for thermal expansion during operation and allowing a tighter fit on the shaft or in the housing. Its rib configuration allows axial displacement between the inner and outer rings, making it suitable as a semi-locating bearing where free axial movement in one direction is required. The polyamide cage design supports smooth roller guidance at the specified speed range while maintaining stable operation under radial loads.