This cylindrical roller bearing carries a single row of rollers guided by a polyamide cage (TVP2 design) and functions as a locating bearing, with two ribs on the outer ring and one rib plus a loose rib washer on the inner ring, matching the NUP design layout. Bore diameter is 40.0 mm, outside diameter 80.0 mm, width 23.0 mm, and net mass 0.5 kg. The E design provides an optimized internal geometry for increased load carrying capacity. Limiting speed is rated at 12500.0 1/min, with a reference speed of 6300.0 1/min. The C3 radial internal clearance gives extra play to accommodate thermal expansion and shaft deflection under load, which suits applications with elevated operating temperatures or heavier radial loads. The rib arrangement allows the bearing to take up axial loads in one direction while acting as the fixed point of the shaft assembly, and the separable inner and outer rings simplify mounting and dismounting. The TVP2 cage, made of glass-fiber reinforced polyamide, keeps friction low and supports the specified speed ratings.