This cylindrical roller bearing carries two ribs on the outer ring and a smooth (rib-free) inner ring, configured as a single-row NU-type non-locating bearing. Bore diameter is 75.0 mm, outside diameter 130.0 mm, width 25.0 mm, and net mass 1.25 kg. The E design provides an optimized internal geometry for increased load carrying capacity, and the bearing runs to a limiting speed of 7500.0 1/min with a reference speed of 4400.0 1/min. The polyamide TVP2 cage guides the rollers with reduced friction, and the C3 radial internal clearance compensates for thermal expansion during operation, making the bearing suitable where the shaft requires axial displacement relative to the housing. Running accuracy is held to P6, allowing use where tighter geometric tolerances on rotation are required than with standard tolerance bearings. As the inner ring is rib-free, the bearing accommodates axial shaft movement while transmitting radial loads only.