Single-row cylindrical roller bearing with a polyamide cage (TVP2), bore diameter 75.0 mm, outside diameter 130.0 mm, width 31.0 mm, net mass 1.6 kg. The design follows the NJ type, with two ribs on the outer ring and one rib on the inner ring, giving a semi-locating function that allows axial displacement in one direction while providing guidance in the other. The E design improves internal load distribution and load carrying capacity. Limiting speed is 7500 1/min, reference speed 3600 1/min, with radial internal clearance in the CN (Group N) range. The semi-locating configuration allows the bearing to accommodate axial shaft expansion while still supporting radial loads, making it suitable as a non-locating or supporting position in a shaft arrangement where controlled axial freedom is required. The polyamide cage (TVP2) is designed for smooth roller guidance at the stated speed range and supports grease or oil lubrication. Standard radial internal clearance (CN) suits typical fit and temperature conditions without additional clearance selection.