This four-point contact bearing carries axial loads in both directions on a single row of balls, with the split outer or inner ring design allowing more balls per row than a standard ball bearing of the same size. Bore diameter is 60.0 mm, outside diameter 110.0 mm, width 22.0 mm, and net mass 0.881 kg. The bearing uses a TVP cage made of glass-fibre-reinforced plastic, part of the X-life design line. Limiting speed is rated at 8200 1/min, with a reference speed of 5300 1/min. The four-point contact geometry makes this bearing suited for applications combining axial loads from two directions with limited radial load, using a single bearing position instead of paired angular contact bearings. The polyamide TVP cage reduces friction and mass compared to a machined cage, supporting the higher limiting speed. As supplied open, lubrication and sealing must be arranged externally, and mounting requires attention to the correct orientation of the split ring during assembly.