This four-point contact bearing carries axial loads acting in both directions within a single row, using a split inner ring construction typical of this design. Bore diameter is 65.0 mm, outside diameter 140.0 mm, width 33.0 mm, and net mass is 2.59 kg. The bearing is fitted with a solid brass cage (MPA), and the design falls under the X-life designation. Limiting speed is rated at 9600 1/min, with a reference speed of 4450 1/min. The single-row design combined with four-point contact geometry allows the bearing to take up axial loads from both directions while keeping the axial section width low, making it suitable for locating positions where two separate bearings would otherwise be needed. The solid brass cage provides stable ball guidance and supports operation at the stated speed ratings. Mounting requires the split inner ring to be assembled correctly, and the bearing should be provided with adequate lubrication matched to the reference speed to maintain the intended running accuracy.