This single row cylindrical roller bearing carries two ribs on the outer ring and one rib on the inner ring, giving it a semi-locating function that allows axial displacement of the non-ribbed side while still guiding the roller set. Bore diameter is 75.0 mm, outside diameter 160.0 mm, width 55.0 mm, net mass 4.917 kg. The E design provides an optimized internal geometry for increased load carrying capacity, and the cage is a solid polyamide TVP2 type. Limiting speed is 5900 1/min, reference speed 3550 1/min. Radial internal clearance is C3, wider than standard, compensating for temperature rise and interference fits under load. The semi-locating arrangement makes this bearing suitable for shaft positions where one bearing must absorb axial displacement while the opposite bearing provides axial location. The one-piece TVP2 cage supports smooth roller guidance at the stated speed range, and the E design geometry is intended for applications requiring higher radial load capacity within the same envelope dimensions.