This single row cylindrical roller bearing carries axial loads in one direction, with two ribs on the outer ring and one rib on the inner ring, forming a semi-locating arrangement of type NJ. Bore diameter is 75.0 mm, outside diameter 160.0 mm, width 55.0 mm, and net mass 5.5 kg. The limiting speed is 7600.0 1/min, reference speed 3550.0 1/min, and the E design provides increased roller and raceway capacity within the standard envelope. The bearing is fitted with an M1 machined brass cage, giving stable roller guidance at higher speeds, and runs with CN (Group N) radial internal clearance for standard fit conditions. As a semi-locating design, it allows axial displacement of the shaft in one direction while still transmitting axial load in the other, which is useful where thermal expansion of the shaft must be compensated. No integral seals are present, so lubrication and sealing must be provided externally, and the bearing can be used with either grease or oil lubrication depending on the operating speed range.