This cylindrical roller bearing carries radial loads through a single row of rollers guided by a polyamide cage (TVP2). The outer ring has two ribs and the inner ring one rib (design NJ), so the bearing functions as a semi-locating bearing, allowing axial displacement in one direction while providing guidance in the other. Bore diameter is 25.0 mm, outside diameter 62.0 mm, width 24.0 mm, and mass is 352.0 g. Limiting speed reaches 16500 1/min, with a reference speed of 8300 1/min, and the reinforced E design increases load capacity compared to standard execution. Radial internal clearance is CN (Group N), suitable for standard fit conditions without special shaft or housing tolerances. The open design without seals requires external lubrication and protection from contamination, and the semi-locating configuration makes this bearing suitable for shaft arrangements where thermal expansion or free axial movement of the inner ring relative to the outer ring must be accommodated.