This single-row cylindrical roller bearing carries a bore diameter of 25.0 mm, outside diameter of 62.0 mm, and width of 17.0 mm, with a net mass of 0.27 kg. It is built in type NU configuration, with two ribs on the outer ring and a smooth (rib-free) inner ring, allowing the inner ring to displace axially relative to the outer ring. The cage is a solid brass cage (M1), and the design follows the E series, offering an increased load rating. Limiting speed is rated at 21500.0 1/min, with a reference speed of 10100.0 1/min. Because the inner ring has no ribs, this bearing functions as a non-locating bearing, compensating for axial displacement caused by thermal expansion or shaft tolerances while still transmitting radial loads. Radial internal clearance is set to CN (Group N), suitable for standard fit and operating conditions, and running accuracy is held to class P6 for tighter dimensional and rotational tolerances than standard P0. The bearing has no integrated seals, so lubrication and external sealing must be provided separately, and it should be paired with grease or oil suited to the operating speed and temperature of the application.