This cylindrical roller bearing carries radial loads and, due to its rib arrangement, also fixes the shaft axially, acting as a locating bearing. The outer ring has two ribs and the inner ring has one rib with a loose rib washer, corresponding to the NUP design. Bore diameter is 25.0 mm, outside diameter 62.0 mm, width 24.0 mm, and net mass is 0.364 kg. The limiting speed is 16500 1/min, with a reference speed of 8200 1/min. The single-row roller set runs in a TVP2 cage, and the E design provides an optimized internal geometry for increased load carrying capacity. Radial internal clearance corresponds to CN (Group N), suitable for standard fit and temperature conditions without preload. The polyamide TVP2 cage allows smooth roller guidance at the stated speed range while keeping mass low. As an open bearing, it requires external sealing and a separate lubrication supply, either grease or oil, matching the operating speed and temperature at the mounting location. The one-piece inner ring rib design allows the bearing to take axial loads in one direction while permitting free axial displacement of the non-locating end of the shaft arrangement.