This cylindrical roller bearing accommodates axial displacement between shaft and housing, functioning as a non-locating bearing due to its NU design with two ribs on the outer ring and a smooth inner ring. Bore diameter is 25.0 mm, outside diameter 62.0 mm, and width 24.0 mm, with a net mass of 0.344 kg. The single-row roller set runs in a TVP2 cage, rated for a limiting speed of 16500 1/min and a reference speed of 8200 1/min, with running accuracy to P6. Radial internal clearance corresponds to CN (Group N), suitable for standard mounting conditions without preload requirements. The E design increases roller load capacity within the same envelope, while the non-locating configuration allows the bearing to absorb thermal expansion or shaft misalignment along the axial direction. The smooth inner ring construction permits free axial movement of the inner ring relative to the roller and cage assembly, making this bearing suitable for applications where one bearing position must remain fixed while the other floats axially.