This single row cylindrical roller bearing NJ2219-E-XL-TVP2 has a bore diameter of 95.0 mm, outside diameter of 170.0 mm and width of 43.0 mm, with a net mass of 3.9 kg. The outer ring carries two ribs and the inner ring one rib, corresponding to type NJ, which allows axial displacement of the shaft relative to the housing while the bearing takes up radial load and acts as a semi-locating bearing. The cage is of TVP2 design, and the E design of the internal geometry supports increased load carrying capacity. Limiting speed is 5600 1/min, reference speed 3050 1/min. Radial internal clearance corresponds to CN (Group N), suitable for standard fit and operating conditions without added preload. The construction with a displaceable ring allows compensation of axial shaft expansion, making the bearing suitable as a non-locating bearing on one side of a shaft arrangement, while the semi-locating function still provides guidance in one axial direction. The polymer cage (TVP2) is designed for reduced friction and stable roller guidance at the given speed range.