This single row cylindrical roller bearing has a bore of 95.0 mm, outside diameter of 170.0 mm, and width of 43.0 mm, with a mass of 3.81 kg. The outer ring carries two ribs while the inner ring is smooth (type NU), making it a non-locating bearing that permits axial displacement between shaft and housing. It uses a polyamide cage (TVP2) and the reinforced E design for increased load capacity. Radial internal clearance is CN (normal group), and running accuracy is manufactured to P6. Limiting speed is 4850 1/min, with a reference speed of 3050 1/min. The non-locating design allows the bearing to accommodate axial shaft expansion without inducing additional axial load, making it suitable for one side of a shaft arrangement where the opposite bearing provides axial location. The smooth inner ring and roller-guided cage support high radial loads at moderate to elevated speeds, while the P6 accuracy class ensures tighter geometric tolerances for demanding rotational precision. Standard CN clearance is suitable for typical fit and temperature conditions without preload requirements.