This cylindrical roller bearing carries roller and cage assembly in a single row, with two ribs on the outer ring and a smooth inner ring, allowing the inner ring to displace axially relative to the outer ring — a non-locating bearing design. Bore diameter is 95.0 mm, outside diameter 170.0 mm, width 43.0 mm, net mass 4.21 kg. Limiting speed is rated at 7200 1/min, with a reference speed of 3050 1/min. The E design provides increased load carrying capacity through optimized internal geometry, and running accuracy corresponds to P6. Radial internal clearance is set to C3, wider than standard, compensating for interference fits and thermal expansion during operation. The M1 cage is a machined brass cage, suited for higher speed operation and stable roller guidance. As a non-locating bearing with smooth inner ring ribs, it accommodates axial displacement of the shaft while the outer ring ribs provide radial guidance, making it suitable for applications where thermal shaft growth needs to be absorbed without inducing axial preload.