This cylindrical roller bearing is a single row design with two ribs on the outer ring and a smooth (rib-free) inner ring, allowing axial displacement between the rings — a non-locating bearing configuration. Bore diameter is 95.0 mm, outside diameter 200.0 mm, and width 45.0 mm, with a net mass of 6.2 kg. The polyamide cage is designated TVP2, and the internal design follows the E variant. Limiting speed is 4700 1/min, with a reference speed of 3550 1/min. Running accuracy corresponds to class P6. The non-locating construction accommodates axial shaft movement caused by thermal expansion, since the inner ring can move freely relative to the outer ring without transmitting axial load. Radial internal clearance falls within Group N (CN), suitable for standard fit and load conditions without preload. The E design increases roller count and load carrying capacity compared to standard cylindrical roller bearings of the same envelope size. The TVP2 cage guides the rollers with reduced friction, supporting the stated speed ratings under proper lubrication.