This plain bearing accommodates angular misalignment through a spherical sliding contact between the outer ring and the inner ring, whose curved surface carries a hard chromium coating for wear resistance. The design is maintenance-free and built to DIN ISO 12240-2, with an open construction that leaves both sides exposed. Overall height is 32.0 mm and the net mass is 2.211 kg. The angular contact geometry allows the bearing to carry combined loads while tolerating shaft misalignment at the sliding surface rather than through internal clearance adjustment. Being maintenance-free, it requires no relubrication during service, and the hard chromium-coated inner ring surface supports sliding motion under load without a separate lubricant film. The open design leaves the sliding surfaces accessible, which should be considered when specifying sealing or protective measures for the surrounding assembly.