This plain bearing transfers radial and axial loads through a spherical sliding contact between the inner and outer ring, allowing angular movement to compensate for shaft misalignment. The inner ring has a curved surface finished with a hard chromium coating, and the design follows DIN ISO 12240-2 with an open, maintenance-free construction. Height is 29.0 mm and net mass is 1.53 kg. The angular contact geometry allows the bearing to carry combined radial and axial loads simultaneously. Being maintenance-free, it does not require relubrication during operation, while the open design leaves the sliding surface exposed, so the mounting environment must keep contamination away from the contact area. The hard chromium coating on the inner ring surface increases resistance to wear at the sliding interface, supporting reliable operation under oscillating or slow rotating motion typical for spherical plain bearings of this construction.