Technical data
37 parametersIdentification
- Manufacturer
- INA
- Type
- Spherical plain bearing
- Part number (SKU)
- GE80-DO#N1
- EAN
- 4012802530872
Dimensions
- Bore d
- 80 mm
- Outside diameter D
- 120 mm
- Mass
- 2.26 kg
Load ratings and operation
- Dynamic load rating C
- 522000 N
- Static load rating C₀
- 2010000 N
- Sealing
- without
Full manufacturer specification27 parameters · expand
- Ball diameter
- 105.0 mm
- Bore diameter bearing, lower tolerance
- -0.015 mm
- Bore diameter bearing, upper tolerance
- 0.0 mm
- Coating
- Durotect M
- Connection measure Inner ring
- 89.4 mm
- Edge Spacing
- 1.0 mm
- Housing Connection Diameter
- 99.0 mm
- Inner ring width
- 55.0 mm
- Maintenance
- Maintenance required
- Material
- Steel
- Max. operating temperature
- 200.0 °C
- Min. operating temperature
- -60.0 °C
- Outer ring width
- 45.0 mm
- Outside diameter, lower tolerance
- -0.015 mm
- Outside diameter, upper tolerance
- 0.0 mm
- PFAS
- no
- Radial Clearance
- 0,072 - 0,142
- Radial clearance, maximum
- 0.142 mm
- Radial clearance, minimum
- 0.072 mm
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Sealing
- without
- Tilt angle
- 6.0 °
- Width inner ring, lower tolerance
- -0.15 mm
- Width inner ring, upper tolerance
- 0.0 mm
- Width outer ring, lower tolerance
- -0.4 mm
- Width outer ring, upper tolerance
- 0.0 mm
Classification
- Manufacturer category
- Rolling and Plain Bearings › Plain Bearings › Spherical Plain Bearings › Spherical Plain Bearings, maintenance required
- eCl@ss class
- 23-05-01-06
- UNSPSC
- 31171515
Description
This spherical plain bearing carries radial loads through a steel/steel sliding contact between the inner and outer ring, allowing angular misalignment between the shaft and housing. It is built to DIN ISO 12240-1, dimension series E, in an open design without sealing, and weighs 2.26 kg. The construction is rated for high load and extended service life demands. As a plain bearing with a steel/steel sliding pair, GE80-DO requires maintenance and periodic relubrication, since there is no seal to retain grease or exclude contaminants. The open design permits inspection and manual lubrication access, while the spherical sliding surface accommodates static or slow oscillating misalignment rather than high-speed rotation.
The same bearing from other manufacturers (14 designations)
Same size and design — suffix notation differs between brands.
INA
GE80-DO
original — this page
equivalent designation
ADR
GE80
ADR
GE80D
ASK
GE80DO
AURORA
GE80ES
ELGES
GE80DA
ELGES
GE80DS
IKO
GE80ES
LS
GE80ES
RBC
MB80
SCHOLZ
GE80
SCHOLZ
GE80DS
SCHOLZ
GE80DSS
SKF
GE80DSS
SKF
GE80ES
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
GE80-DO
Spherical plain bearing
⌀80 × 120 mm
od EUR 68.91net
+ VAT 23% = EUR 84.76 gross
Cheaper in larger quantities
| from 5 pcs | EUR 67.53 | −2% |
| from 10 pcs | EUR 66.84 | −3% |
| from 25 pcs | EUR 65.46 | −5% |
| from 50 pcs | EUR 64.09 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
