Technical data
35 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6003#N1
- EAN
- 4012801163521
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 17 mm
- Outside diameter D
- 35 mm
- Width B
- 10 mm
- Mass
- 37 g
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 6400 N
- Static load rating C₀
- 3250 N
- Limiting speed
- 31000 1/min
Full manufacturer specification21 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 14.3
- Dimensional / heat stabilization
- SN
- Fatigue load limit, radial
- 162.0 N
- Inner ring shoulder diameter
- 22.65 mm
- Lubricant
- without
- Max. operating temperature
- 120.0 °C
- Maximum fillet radius
- 0.3 mm
- Maximum housing shoulder diameter
- 33.0 mm
- Min. operating temperature
- -30.0 °C
- Minimum chamfer
- 0.3 mm
- Minimum shaft shoulder diameter
- 19.0 mm
- Outer ring caliber diameter
- 30.81 mm
- Outer ring shoulder diameter
- 29.51 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- Reference speed
- 20300.0 1/min
- RoHS
- RoHS compliant
- Type of seal
- without
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads on a single row of balls, running with a steel sheet metal cage (JN). Bore diameter is 17.0 mm, outside diameter 35.0 mm, width 10.0 mm, and net mass is 37.0 g. Limiting speed reaches 31000 1/min, with a reference speed of 20300 1/min. Radial internal clearance falls within group CN, suiting standard fit and load conditions without special adjustment. The bore type Z indicates a shield configuration on one side, keeping grease in place while allowing basic protection against contamination. Dimensionally and constructionally, it corresponds to SKF 6003, NSK 6003, and NTN 6003.
The same bearing from other manufacturers (18 designations)
Same size and design — suffix notation differs between brands.
FAG
6003
original — this page
equivalent designation
FLT
6003
GMN
6003
KOYO
6003
MGM
6003
MITS
6003
NACHI
6003
NSK
6003
NTN
6003
NWG
6003
PEER
6003
RHP
6003
SKF
6003
SKF
6003/QE6
SNR
6003
STEYR
6003
VOLVO
7181119
ZKL
6003
conditionally interchangeable
These items are conditionally interchangeable — check the design before ordering.
NSK
6003CM
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6003
Deep groove ball bearing
⌀17 × 35 × 10 mm
od EUR 1.73net
+ VAT 23% = EUR 2.13 gross
Cheaper in larger quantities
| from 5 pcs | EUR 1.70 | −2% |
| from 10 pcs | EUR 1.68 | −3% |
| from 25 pcs | EUR 1.64 | −5% |
| from 50 pcs | EUR 1.61 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
