Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6304-2RSR-C3#N1
- EAN
- 4012801562997
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 20 mm
- Outside diameter D
- 52 mm
- Width B
- 15 mm
- Mass
- 150 g
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 16900 N
- Static load rating C₀
- 7900 N
- Limiting speed
- 8800 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 12.4
- Dimensional / heat stabilization
- SN
- Fatigue load limit, radial
- 540.0 N
- Inner ring shoulder diameter
- 30.3 mm
- Lubricant
- GA14
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 1.0 mm
- Maximum housing shoulder diameter
- 45.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.1 mm
- Minimum shaft shoulder diameter
- 27.0 mm
- Outer ring caliber diameter
- 44.4 mm
- Outer ring shoulder diameter
- 41.95 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
Carries radial loads on a 20.0 mm shaft, with a 52.0 mm outside diameter and 15.0 mm width, at a mass of 0.15 kg. This is a deep groove ball bearing, single row, sealed on both sides, fitted with a steel sheet metal cage (JN). Radial internal clearance is C3 (Group 3), providing additional play above standard clearance. Limiting speed is rated at 8800 1/min. The two-side sealing arrangement retains grease inside the bearing and blocks contaminants from entering, so no external sealing is required at the mounting position. The C3 internal clearance compensates for temperature rise during operation and interference-fit mounting, keeping the bearing free of excessive preload. Dimensionally and constructionally equivalent to SKF 6304-2RS1/C3, NSK 6304DDUC3, and NTN 6304LLUC3.
The same bearing from other manufacturers (5 designations)
Same size and design — suffix notation differs between brands.
FAG
6304-2RSR-C3
original — this page
equivalent designation
NSK
6304DDUC3E
PEER
6304-2RLD-C3
SKF
6304-2RS1/C3
SKF
6304-2RSH/C3
NTN
6304LLUC3
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6304-2RSR-C3
Common designation: 6304 2RS C3
Deep groove ball bearing
⌀20 × 52 × 15 mm
od EUR 3.56net
+ VAT 23% = EUR 4.38 gross
Cheaper in larger quantities
| from 5 pcs | EUR 3.49 | −2% |
| from 10 pcs | EUR 3.45 | −3% |
| from 25 pcs | EUR 3.38 | −5% |
| from 50 pcs | EUR 3.31 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
