This single row deep groove ball bearing carries a bore of 17.0 mm, an outside diameter of 35.0 mm, and a width of only 8.0 mm, giving a low-profile design with a net mass of 32.0 g. The cage is a steel sheet metal type (JN), and the internal geometry falls under the narrow 160.. series with an A-type design. Radial internal clearance is C3, providing greater-than-normal clearance to compensate for interference fits and thermal expansion during operation. The limiting speed reaches 31000 1/min, while the reference speed is 17700 1/min. The C3 clearance class suits applications where shaft and housing fits, or temperature rise during operation, would otherwise reduce running clearance below optimal levels. The steel sheet metal cage keeps mass low and allows higher speed capability within the stated limiting and reference speed values. This bearing is unshielded and open on both sides, so lubricant supply and contamination control must be arranged externally. The compact width makes it suitable for installations where axial space is restricted while radial load capacity from the ball complement is still required.