This four-point contact bearing carries radial load together with axial load acting in either direction on a single row of balls, owing to its split inner ring design. Bore diameter is 85.0 mm, outside diameter 180.0 mm, width 41.0 mm, and net mass is 5.53 kg. The bearing is fitted with a solid brass cage (MPA) and holding grooves, and rated for a limiting speed of 6600 1/min and a reference speed of 3550 1/min. The C3 internal clearance accommodates thermal expansion during operation and compensates for interference fit tolerances on shaft and housing. Holding grooves allow the split inner ring halves to be secured against axial displacement, making mounting and dismounting straightforward. The solid brass cage provides stable ball guidance at the stated speed ratings, and the design suits applications where axial loads from both directions must be carried on a single bearing position without needing an additional angular contact pair.