This four-point contact bearing carries radial load together with axial load acting in either direction, using a single row of balls in angular contact against four raceway points. Bore diameter is 95.0 mm, outside diameter 200.0 mm, width 45.0 mm, and net mass 7.229 kg. The cage is a solid brass MPA type, and the outer ring features holding grooves. Limiting speed reaches 5900 1/min, with a reference speed of 3250 1/min. Internal clearance is C3. Because the design separates into two halves for assembly, it accepts combined loads within a compact axial width compared to two single-row angular contact bearings mounted back to back. The solid brass cage guides the balls securely at the stated speeds, and the C3 clearance compensates for temperature rise during operation. Being an open bearing without seals, it requires external lubrication and protection from contamination, and mounting should ensure the correct orientation of the split rings to maintain full load-carrying capacity in both axial directions.