This cylindrical roller bearing NUP214-E-XL-TVP2 is a single row design with a cage, functioning as a locating bearing. The outer ring has 2 ribs and the inner ring has 1 rib with an internal rib washer, corresponding to type NUP. Bore diameter is 70.0 mm, outside diameter 125.0 mm, width 24.0 mm, and net mass 1.19 kg. Limiting speed is rated at 7800.0 1/min, with a reference speed of 4650.0 1/min. The cage is made in TVP2 design, and the bearing follows the E design line with radial internal clearance in group CN (Group N). The locating design with ribs on both rings allows the bearing to take up axial loads in addition to radial ones, fixing the shaft position within the housing. The CN internal clearance corresponds to standard operating conditions without special clearance adjustment. The polyamide TVP2 cage supports smooth roller guidance and contributes to reliable operation within the rated speed limits stated above.