This single row cylindrical roller bearing, type NJ214-E-XL-TVP2, has a bore of 70.0 mm, outside diameter of 125.0 mm, and width of 24.0 mm, with a net mass of 1.16 kg. The outer ring carries two ribs and the inner ring one rib, forming a semi-locating arrangement that allows axial displacement in one direction while providing guidance in the other. The bearing features a polyamide cage (TVP2) and an E design for increased load rating. Limiting speed is rated at 7800 1/min, with a reference speed of 4650 1/min. The radial internal clearance falls in the CN (Group N) range, suitable for standard mounting conditions without special preload or clearance requirements. The semi-locating design and single rib on the inner ring permit a degree of axial roller displacement, useful where slight axial float must be accommodated on one side of the shaft. The polyamide cage supports smooth roller guidance at the given speed ratings, and the open, unshielded construction requires external sealing and lubrication provision appropriate to the operating environment.