This cylindrical roller bearing carries the load through a single row of rollers guided by a polyamide cage (TVP2 design). The outer ring has two ribs and the inner ring has one rib, giving the bearing its semi-locating function while allowing axial displacement of the ring without ribs. Bore diameter is 70.0 mm, outside diameter 150.0 mm, width 35.0 mm, and net mass is 2.743 kg. Limiting speed is rated at 6300.0 1/min, with a reference speed of 4500.0 1/min. The E design indicates a reinforced internal geometry for increased load rating. Radial internal clearance is C3, wider than standard, which compensates for thermal expansion during operation and allows the bearing to run with the fits typically required at higher shaft or housing temperatures. The semi-locating arrangement lets the bearing take up axial displacement in one direction while still providing radial guidance, making it suitable for shaft arrangements where a fixed bearing at one end and this bearing at the other are required. The polyamide cage supports operation up to the stated limiting speed while keeping roller spacing consistent under the radial loads the single-row design is meant to carry.