This cylindrical roller bearing is a single row design with a polyamide cage (TVP2), featuring two ribs on the outer ring and one rib with a loose rib washer on the inner ring, corresponding to the NUP construction. Bore diameter is 55.0 mm, outside diameter 100.0 mm, width 21.0 mm, and net mass 0.68 kg. The limiting speed is 10000 1/min, with a reference speed of 5800 1/min. The E design provides an optimized internal geometry for increased load carrying capacity. The rib configuration allows the inner and outer rings to be axially displaced relative to each other, so this bearing functions as a locating bearing while permitting the free ring to accommodate axial movement of the shaft on the non-fixed side. Radial internal clearance is in group CN, suitable for standard fit and operating temperature conditions. The polyamide cage design supports smooth roller guidance at the given speed range, and the open design without integrated sealing requires external sealing and a separate lubrication arrangement, typically with grease or oil depending on the operating requirements.