This cylindrical roller bearing carries radial loads with a single row of rollers, guided by a polymer cage (TVP2). Bore diameter is 55.0 mm, outside diameter 100.0 mm, width 25.0 mm, and net mass 0.8 kg. The outer ring has two ribs and the inner ring one rib, giving the NJ design a semi-locating function that supports the shaft in one axial direction while allowing axial displacement in the other. The E design provides increased load rating compared to standard internal geometry. Limiting speed is 10000 1/min, reference speed 4700 1/min. Radial internal clearance is C3, wider than normal, compensating for thermal expansion under load and interference fits. The semi-locating arrangement allows this bearing to take up axial displacement caused by shaft expansion or misalignment on one side while still providing positioning on the other, making it suitable where the shaft needs one fixed and one floating support point. The TVP2 cage keeps rollers evenly spaced and reduces friction losses at the given speed range.