This cylindrical roller bearing carries two ribs on the outer ring and a smooth inner ring, configured as a non-locating bearing that allows axial displacement between shaft and housing within the bearing itself. Bore diameter is 55.0 mm, outside diameter 120.0 mm, width 43.0 mm, with a net mass of 2.161 kg. The E design provides increased load rating compared to standard internal geometry. Limiting speed is 8000.0 1/min and reference speed 4500.0 1/min. The polyamide TVP2 cage reduces friction and supports smooth roller guidance at the stated speeds. Radial internal clearance C3 compensates for interference fits and thermal expansion under operating load, keeping the bearing free of excessive preload. Running accuracy is held to P6, suitable for shaft mounting where axial float must be absorbed without transmitting axial forces through this bearing position. No seals are fitted, so lubrication and contamination protection must be provided externally.