This single row deep groove ball bearing carries a bore diameter of 110.0 mm, an outside diameter of 240.0 mm, and a width of 50.0 mm, giving the basic envelope dimensions for housing and shaft fit selection. The bearing is fitted with seals on both sides, sealing the raceway against contamination and retaining lubricant inside the bearing. The cage is a steel sheet metal cage, designation JN. Net mass is 10.36 kg, relevant for handling and lifting during mounting. Limiting speed is stated at 1750.0 1/min. Radial internal clearance is C3, meaning a clearance greater than the normal range, which compensates for temperature rise and interference fit during operation. The bore type Z relates to the bore tolerance as shown on the manufacturer's drawing. With both-side sealing and steel cage construction, this bearing is suited for radial loads combined with light axial loads, running at the stated speed limit without external resealing of the raceway during service life.