This deep groove ball bearing carries radial and moderate axial loads through a single row of balls running in a two-piece pressed steel cage (JN). Bore diameter is 110.0 mm, outside diameter 200.0 mm, width 38.0 mm, and net mass 4.345 kg. Both sides are fitted with metal shields (2Z), and internal clearance is increased to C3 (Group 3). Limiting speed is rated at 3800 1/min, with a reference speed of 4500 1/min. The C3 clearance compensates for thermal expansion during operation and for a tight fit on the shaft, keeping the bearing free of preload once running temperature is reached. Metal shields on both faces limit ingress of solid contaminants while allowing grease relubrication through the shield gap, so the bearing is suited to grease lubrication rather than oil. The pressed steel cage keeps mass low and gives adequate guidance at the stated speed range. Equivalent designations: SKF 6222-2Z/C3, NSK 6222ZZC3, NTN 6222ZZC3.