This deep groove ball bearing carries radial and moderate axial loads through a single row of balls running in a steel sheet metal cage (JN). Bore diameter is 110.0 mm, outside diameter 240.0 mm, width 50.0 mm, with a net mass of 9.981 kg. The bearing is fitted with metal shields on both sides (Z bore type) and features C3 internal clearance, wider than normal. Limiting speed is rated at 3250.0 1/min, with a reference speed of 4150.0 1/min. The C3 clearance compensates for thermal expansion and shaft fit tolerances, allowing stable operation under radial load where a tighter clearance would cause preload. The steel sheet metal cage keeps mass low and gives adequate guidance for the rolling elements at the rated speeds. Shielding on both sides retains grease and limits ingress of coarse contamination, though it does not provide a full seal, so relubrication intervals should follow the operating environment. Dimensionally and constructionally, this bearing corresponds to SKF 6322-2Z/C3, NSK 6322ZZC3, and NTN 6322ZZC3.