This single row deep groove ball bearing carries a bore diameter of 65.0 mm, outside diameter of 140.0 mm, and width of 33.0 mm, with a net mass of 2.008 kg. It is built with a steel sheet metal cage (JN design) and runs with a C3 internal clearance, providing greater internal play than standard clearance to accommodate operating conditions with elevated temperature or interference fits. Limiting speed is 7300 1/min, with a reference speed of 7000 1/min. The C3 clearance makes this bearing suitable for shaft-housing combinations requiring tighter fits without risking clearance loss, while the steel cage supports stable ball guidance across the rated speed range. As a single row deep groove ball bearing, it takes combined radial and moderate axial loads in both directions. No sealing or shielding is fitted, so lubrication and contamination protection must be provided externally, and relubrication intervals should follow the operating speed and load conditions on site.