Carries radial loads and moderate axial loads in a single row of balls running in deep raceway grooves, with the load path fixed by the groove geometry rather than by additional guiding elements. Bore diameter is 65.0 mm, outside diameter 120.0 mm, width 23.0 mm, mass 0.964 kg, and limiting speed reaches 3250.0 1/min. The bearing has seals on both sides and a steel sheet metal cage (JN), with internal clearance in group C3, wider than normal clearance. The C3 clearance compensates for the temperature rise and interference fit tightening that occur once the bearing is mounted, keeping the running clearance within the intended range under operating conditions. The two-sided seals retain the internal lubricant and keep out external contamination, so the bearing runs sealed for life without needing external relubrication as long as the specified speed and load limits are respected. Equivalent designations for this bore, outside diameter and construction are SKF 6213-2RS1/C3, NSK 6213DDUC3 and NTN 6213LLUC3.