Technical data
37 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6313-C-2HRS-C3#N1
- EAN
- 4054369499346
- Cage
- JN
- Tolerance class
- P6
Dimensions
- Bore d
- 65 mm
- Outside diameter D
- 140 mm
- Width B
- 33 mm
- Mass
- 2.09 kg
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 101000 N
- Static load rating C₀
- 60000 N
- Limiting speed
- 4500 1/min
Full manufacturer specification23 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 13.2
- Category
- C
- Design variant
- C
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 4100.0 N
- Inner ring caliber diameter
- 85.59 mm
- Inner ring shoulder diameter
- 87.73 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 2.1 mm
- Maximum housing shoulder diameter
- 128.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 2.1 mm
- Minimum shaft shoulder diameter
- 77.0 mm
- Outer ring caliber diameter
- 121.4 mm
- Outer ring shoulder diameter
- 118.22 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2HRS
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads in a single row of balls running between an inner ring of 65.0 mm bore and an outer ring of 140.0 mm outside diameter, with a width of 33.0 mm. It belongs to Generation C design and weighs 2.087 kg. The bearing is fitted with seals on both sides (2HRS) and uses a steel sheet metal cage (JN), allowing a limiting speed of 4500 1/min. The C3 radial internal clearance provides extra play to compensate for thermal expansion during operation, making the bearing suitable for applications with elevated running temperatures or interference fits. The integrated seals on both sides retain grease inside the bearing and keep out contaminants, so no external sealing arrangement is required. This sealed, pre-lubricated design is intended for maintenance-reduced operation once mounted.
The same bearing from other manufacturers (1 designations)
Same size and design — suffix notation differs between brands.
FAG
6313-C-2HRS-C3
original — this page
conditionally interchangeable
These items are conditionally interchangeable — check the design before ordering.
SKF
6313-2RSJEM
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6313-C-2HRS-C3
Common designation: 6313 2RS C3 · former FAG designation: 6313-2RSR-C3
Deep groove ball bearing
⌀65 × 140 × 33 mm
od EUR 56.68net
+ VAT 23% = EUR 69.72 gross
Cheaper in larger quantities
| from 5 pcs | EUR 55.55 | −2% |
| from 10 pcs | EUR 54.98 | −3% |
| from 25 pcs | EUR 53.85 | −5% |
| from 50 pcs | EUR 52.72 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
