This single row deep groove ball bearing accommodates radial loads and moderate axial loads in both directions, transmitted through a single row of balls running in deep raceway grooves. It has a bore diameter of 60.0 mm, an outside diameter of 130.0 mm, and a width of 31.0 mm, with a net mass of 1.697 kg. The bearing is fitted with metal shields on both sides (2Z) and uses a steel sheet metal cage (JN). Limiting speed is 6700.0 1/min, with a reference speed of 7400.0 1/min. Radial internal clearance is C3, which is greater than standard clearance and compensates for temperature rise and interference fits during operation. The steel shields protect the raceway from coarse contamination while allowing grease relubrication is not intended, as the design retains factory-applied grease without full sealing. The C3 clearance combined with the JN cage suits applications with elevated operating temperatures or where a tighter fit reduces internal clearance below the standard range.