This deep groove ball bearing carries radial and moderate axial loads through a single row of balls running in deep raceway grooves, allowing operation with limited shaft misalignment. It is built with a bore diameter of 60.0 mm, outside diameter of 130.0 mm, and width of 31.0 mm, weighing 1.681 kg. The bearing belongs to Generation C construction and uses a steel sheet metal cage (JN). Limiting speed is rated at 7900 1/min, with a reference speed of 7400 1/min. Radial internal clearance is CN (Group N), suitable for standard fit and load conditions without preload adjustment. The open design (bore type Z) allows relubrication and requires external sealing if contamination protection is needed. This configuration suits applications requiring stable radial guidance at moderate to higher rotational speeds, where standard clearance and cage strength under thermal load are relevant selection factors.