Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6012-2RSR-C3#N1
- EAN
- 4012801163736
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 60 mm
- Outside diameter D
- 95 mm
- Width B
- 18 mm
- Mass
- 419 g
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 31500 N
- Static load rating C₀
- 23200 N
- Limiting speed
- 3750 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 15.6
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 1230.0 N
- Inner ring shoulder diameter
- 71.325 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 1.0 mm
- Maximum housing shoulder diameter
- 89.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.1 mm
- Minimum shaft shoulder diameter
- 66.0 mm
- Outer ring caliber diameter
- 85.98 mm
- Outer ring shoulder diameter
- 83.88 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads in a single row of balls running in ground raceways. Bore diameter is 60.0 mm, outside diameter 95.0 mm, width 18.0 mm, and net mass is 0.419 kg. The limiting speed is 3750 1/min. It is fitted with seals on both sides and a pressed steel sheet metal cage, and the radial internal clearance is C3 (Group 3), wider than the standard clearance. The seals retain grease inside the bearing and keep contaminants out, so the unit runs sealed for life without additional relubrication. The C3 clearance compensates for temperature rise during operation and for a tight fit, keeping the bearing free of preload after mounting. Dimensionally and constructionally interchangeable with SKF 6012-2RS1/C3, NSK 6012DDUC3, and NTN 6012LLUC3.
The same bearing from other manufacturers (4 designations)
Same size and design — suffix notation differs between brands.
FAG
6012-2RSR-C3
original — this page
equivalent designation
PEER
6012-2RLD-C3
SKF
6012-2RS1/C3
NSK
6012DDUC3
NTN
6012LLUC3
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6012-2RSR-C3
Common designation: 6012 2RS C3
Deep groove ball bearing
⌀60 × 95 × 18 mm
od EUR 11.11net
+ VAT 23% = EUR 13.67 gross
Cheaper in larger quantities
| from 5 pcs | EUR 10.89 | −2% |
| from 10 pcs | EUR 10.78 | −3% |
| from 25 pcs | EUR 10.55 | −5% |
| from 50 pcs | EUR 10.33 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
