Carries radial loads and moderate axial loads on a shaft of 80.0 mm bore, 140.0 mm outside diameter and 26.0 mm width, weighing 1.49 kg. This deep groove ball bearing is a single row design with metal shields on both sides and a pressed steel sheet cage (JN). Radial internal clearance is C3 (Group 3), wider than standard, which compensates for thermal expansion during operation. Limiting speed is rated at 6200 1/min, with a reference speed of 5500 1/min. The C3 clearance makes this bearing suitable for applications where operating temperature causes the inner ring to expand relative to the outer ring, keeping the bearing free of excessive preload. The metal shields protect the raceway and balls from coarse contaminants while allowing grease relubrication is not intended, as shielded bearings are typically grease-filled for the service life. The steel sheet cage guides the balls at the stated speed range without added axial stiffness. Equivalent designations from other manufacturers are SKF 6216-2Z/C3, NSK 6216ZZC3 and NTN 6216ZZC3.