Technical data
35 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6016-2Z#N1
- EAN
- 4012801201520
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 80 mm
- Outside diameter D
- 125 mm
- Width B
- 22 mm
- Mass
- 893 g
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 51000 N
- Static load rating C₀
- 40000 N
- Limiting speed
- 6300 1/min
Full manufacturer specification21 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 15.7
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 2410.0 N
- Inner ring shoulder diameter
- 93.7 mm
- Lubricant
- GA13
- Max. operating temperature
- 120.0 °C
- Maximum fillet radius
- 1.0 mm
- Maximum housing shoulder diameter
- 119.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.1 mm
- Minimum shaft shoulder diameter
- 86.0 mm
- Outer ring caliber diameter
- 113.7 mm
- Outer ring shoulder diameter
- 110.98 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- Reference speed
- 6100.0 1/min
- RoHS
- RoHS compliant
- Type of seal
- 2Z
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries radial and moderate axial loads through a single row of balls running in a steel sheet metal cage (JN). Bore diameter is 80.0 mm, outside diameter 125.0 mm, width 22.0 mm, and net mass is 0.893 kg. The 6016-2Z design uses metal shields on both sides, giving basic protection against dust while retaining the fill of grease inside the bearing. Limiting speed is rated at 6300 1/min, with a reference speed of 6100 1/min. Radial internal clearance falls within the CN (Group N) range, suitable for standard fit conditions without added preload. The shielded construction (Z) keeps the raceway shielded from coarse contamination while allowing grease relubrication where needed. This bearing corresponds dimensionally and constructionally to SKF 6016-2Z, NSK 6016ZZ, and NTN 6016ZZ.
The same bearing from other manufacturers (8 designations)
Same size and design — suffix notation differs between brands.
FAG
6016-2Z
original — this page
equivalent designation
FLT
6016ZZ
PEER
6016-ZZD
RHP
6016-2Z
SKF
6016-2Z
STEYR
6016-2Z
ZWZ
6016-2Z
NSK
6016ZZ
NTN
6016ZZ
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6016-2Z
Deep groove ball bearing
⌀80 × 125 × 22 mm
od EUR 33.15net
+ VAT 23% = EUR 40.77 gross
Cheaper in larger quantities
| from 5 pcs | EUR 32.48 | −2% |
| from 10 pcs | EUR 32.15 | −3% |
| from 25 pcs | EUR 31.49 | −5% |
| from 50 pcs | EUR 30.83 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
