Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6216-2RSR-C3#N1
- EAN
- 4012801077415
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 80 mm
- Outside diameter D
- 140 mm
- Width B
- 26 mm
- Mass
- 1.49 kg
- Radial clearance
- C3 (Group 3)
Load ratings and operation
- Dynamic load rating C
- 77000 N
- Static load rating C₀
- 55000 N
- Limiting speed
- 2700 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 15.0
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 3650.0 N
- Inner ring shoulder diameter
- 98.5 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 2.0 mm
- Maximum housing shoulder diameter
- 129.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 2.0 mm
- Minimum shaft shoulder diameter
- 91.0 mm
- Outer ring caliber diameter
- 124.38 mm
- Outer ring shoulder diameter
- 121.48 mm
- PFAS
- no
- Radial internal clearance
- C3 (group 3)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
Carries radial loads and moderate axial loads on a shaft with a bore of 80.0 mm, running against a 140.0 mm outside diameter and 26.0 mm width. This deep groove ball bearing has a single row of balls, seals on both sides, and a steel sheet metal cage (JN), giving a net mass of 1.49 kg and a limiting speed of 2700.0 1/min. The C3 radial internal clearance (Group 3) compensates for the tighter fit and thermal expansion typical of sealed bearings, keeping operating clearance within the intended range after mounting. Seals on both sides retain the factory-filled grease and block contamination ingress, so no relubrication provisions are needed during service. Equivalent designations for this size and construction are SKF 6216-2RS1/C3, NSK 6216DDUC3, and NTN 6216LLUC3.
The same bearing from other manufacturers (3 designations)
Same size and design — suffix notation differs between brands.
FAG
6216-2RSR-C3
original — this page
equivalent designation
SKF
6216-2RS1/C3
NSK
6216DDUC3
NTN
6216LLUC3
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6216-2RSR-C3
Common designation: 6216 2RS C3
Deep groove ball bearing
⌀80 × 140 × 26 mm
od EUR 51.70net
+ VAT 23% = EUR 63.59 gross
Cheaper in larger quantities
| from 5 pcs | EUR 50.67 | −2% |
| from 10 pcs | EUR 50.15 | −3% |
| from 25 pcs | EUR 49.12 | −5% |
| from 50 pcs | EUR 48.08 | −7% |
Dispatched within 24 h from our own warehouse
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
