Technical data
34 parametersIdentification
- Manufacturer
- FAG
- Type
- Deep groove ball bearing
- Part number (SKU)
- 6213-2RSR#N5
- EAN
- 4012801203296
- Cage
- JN
- Tolerance class
- PN
Dimensions
- Bore d
- 65 mm
- Outside diameter D
- 120 mm
- Width B
- 23 mm
- Mass
- 964 g
- Radial clearance
- CN (Group N)
Load ratings and operation
- Dynamic load rating C
- 63000 N
- Static load rating C₀
- 41500 N
- Limiting speed
- 3250 1/min
Full manufacturer specification20 parameters · expand
- Bore type
- Z
- Cage
- JN
- Calculation factor
- 14.4
- Dimensional / heat stabilization
- S0
- Fatigue load limit, radial
- 2850.0 N
- Inner ring shoulder diameter
- 82.0 mm
- Lubricant
- GA13
- Max. operating temperature
- 100.0 °C
- Maximum fillet radius
- 1.5 mm
- Maximum housing shoulder diameter
- 111.0 mm
- Min. operating temperature
- -20.0 °C
- Minimum chamfer
- 1.5 mm
- Minimum shaft shoulder diameter
- 74.0 mm
- Outer ring caliber diameter
- 106.34 mm
- Outer ring shoulder diameter
- 103.16 mm
- PFAS
- no
- Radial internal clearance
- CN (group N)
- REACH
- REACH compliant
- RoHS
- RoHS compliant
- Type of seal
- 2RSR
Classification
- Manufacturer category
- Rolling and Plain Bearings › Ball Bearings › Deep Groove Ball Bearings
- eCl@ss class
- 23-05-08-01
- UNSPSC
- 31171502
Description
This deep groove ball bearing carries loads through a single row of balls running between an inner ring with a 65.0 mm bore and an outer ring with a 120.0 mm outside diameter, giving a width of 23.0 mm and a net mass of 0.964 kg. It is fitted with seals on both sides and uses a steel sheet metal cage (JN). Radial internal clearance is in group CN (Group N), and the permissible limiting speed is 3250.0 1/min. The integrated seals keep grease in and contaminants out, so the bearing runs pre-lubricated and requires no external relubrication during service. Standard CN clearance and the steel cage suit it to installations without special preload or extreme temperature demands, where sealed, maintenance-free operation is the main requirement. Dimensionally and constructionally it corresponds to SKF 6213-2RS1, NSK 6213DDU and NTN 6213LLU.
The same bearing from other manufacturers (12 designations)
Same size and design — suffix notation differs between brands.
FAG
6213-2RSR
original — this page
equivalent designation
FLT
6213.2RS
KOYO
62132RS
KOYO
6213DD
NACHI
6213.2NSL
NSK
6213DDU
NTN
6213LLU
PEER
6213-2RLD
RHP
6213-2RS
SCSS
305053
SKF
6213-2RS1
ZWZ
6213-2RS
conditionally interchangeable
These items are conditionally interchangeable — check the design before ordering.
NSK
6213DDUCM
This is a dimensional and design equivalent, not the same product. If in doubt, ask us before ordering.
6213-2RSR
Common designation: 6213 2RS
Deep groove ball bearing
⌀65 × 120 × 23 mm
od EUR 42.06net
+ VAT 23% = EUR 51.73 gross
This item is brought in to order (about 10 working days) and we sell it to business customers. Open a business account.
Cheaper in larger quantities
| from 5 pcs | EUR 41.22 | −2% |
| from 10 pcs | EUR 40.80 | −3% |
| from 25 pcs | EUR 39.96 | −5% |
| from 50 pcs | EUR 39.12 | −7% |
Brought in to order — we confirm the date after checking with the manufacturer.
Shipping within the EU: DHL, GLS, from EUR 13.18 net. Transit time 3–5 business days after dispatch. Shipping and returns →
Ten towar sprzedawany jest w opakowaniach po 5 szt.
Buying for a company?
Open a business account →Documentation
Datasheet (PDF)RoHS / REACH compliance declaration (PDF)Opening a document for the first time can take up to a minute while the manufacturer prepares it.
