This deep groove ball bearing carries radial and limited axial loads on a single row of balls running in a steel sheet metal cage (JN). The bore diameter is 110.0 mm, outside diameter 170.0 mm, and width 28.0 mm, giving the basic envelope for shaft and housing fit. Net mass is 2.06 kg. Both sides are fitted with seals (2RSR), keeping the raceway protected and retaining grease without external relubrication. The limiting speed is 2080 1/min, and internal clearance is C3 (Group 3), wider than normal, which compensates for heat generation and interference fit expansion during operation. The C3 clearance makes this bearing suited to mounting conditions with tighter fits or temperature rise across the rings, where standard clearance would otherwise run too tight. Sealing on both faces means lubrication is sealed-for-life with grease, and the arrangement avoids the need for separate external seals in the housing. Dimensionally and constructionally equivalent references are SKF 6022-2RS1/C3, NSK 6022DDUC3, and NTN 6022LLUC3.