This spherical roller bearing accommodates radial loads together with axial loads in both directions and compensates for shaft misalignment through its two rows of barrel rollers running on a common spherical raceway in the outer ring. Main dimensions follow DIN 635-2: bore 70.0 mm, outside diameter 150.0 mm, width 51.0 mm, net mass 4.22 kg. It carries a JPA cage, E1 design, and a cylindrical bore of type Z. Limiting speed is 4800 1/min, reference speed 3700 1/min. The C4 radial internal clearance is greater than standard, offsetting the reduction in clearance that occurs from an interference fit or from heat generated in operation. This makes the bearing suitable where shaft deflection or thermal expansion must be absorbed without loss of running clearance. Relubrication follows the standard feature, so grease replenishment can be carried out through the arrangement provided by this design during service.